Skip to content

Home › Guides › Alcantara steering wheel

Cleaning an alcantara steering wheel without damage

Alcantara feels great, but it ages quickly where your hands go. Good news: a dull steering wheel can often be brought back, as long as you use the right touch.

Alcantara and carbon steering wheel of an Audi RS6, after cleaning

Alcantara and carbon steering wheel of an Audi RS6, after cleaning

Why alcantara darkens

Alcantara is a microfibre with a velvet feel. Its fibres absorb what hands leave behind: skin oil, hand cream, sweat. Over time those deposits glue the fibres together. The wheel darkens, turns smooth and shiny at the grip areas, and loses its original feel.

This is not wear in the strict sense: it is mostly dirt. And that is why it can often be brought back.

Mistakes that damage it

  • Too much moisture: soaked alcantara dries badly and can mark.
  • Rubbing hard: the fibre lies flat and mats.
  • Household wipes and leather products: they leave a film that glues the fibre again.
  • A hairdryer or direct heat to speed up drying.

The right method

Work in small areas. A dedicated alcantara product, barely damp, is applied then worked with a soft brush that lifts the dirt and raises the fibres. Wipe straight away with a clean microfibre, then brush dry in one direction to get an even finish.

If the wheel combines several materials, such as carbon or leather, each one is treated separately with its own product.

What can be recovered, and what cannot

Dirty, darkened or flattened alcantara usually looks far more even after careful cleaning. However, fibre that is truly worn, holed or burnt does not grow back: that is a job for an upholsterer.

Our work on an Audi RS6 wheel, alcantara and carbon, is told on the Audi RS6 page.

Care between cleans

  • Drive with clean, dry hands, without freshly applied cream.
  • Brush gently now and then to raise the fibre.
  • Do not wait until the wheel is very dark: the older the dirt, the longer it takes to remove.

Alcantara, leather, carbon: know your wheel

Many sports steering wheels combine several materials: alcantara on the sides, smooth or perforated leather, lacquered carbon inserts, coloured stitching. Before cleaning, identify each area, because a product suited to one can stain another.

Lacquered carbon is cleaned with microfibre, no greasy product; leather gets a cleaner then a conditioner; alcantara gets its dedicated product and a soft brush.

Other alcantara parts

The steering wheel is not alone: gear knob, door trims, headliner, seat bolsters. These areas get dirty more slowly, but the same rule applies: little moisture, a soft brush, immediate drying.

The headliner needs particular care: the glue holding it does not like moisture. Our story on the cabin of a Lamborghini Aventador SVJ explains this approach.

How often to clean it

There is no fixed rule: it depends on mileage and on the hands holding the wheel. The right signal is visual: as soon as the grip areas darken or turn shiny, it is time.

Light, regular cleaning beats a big rescue job: the fibre recovers all the better when the dirt is recent.

Which package?

Steering wheel care is included in the Sublime package, from €400 incl. VAT for a saloon, along with leather restoration. With the Essentiel package, a worn alcantara wheel can be added as an option, priced before the job.

Everything is explained on the Leather and alcantara page.

Need a hand?

Nicolas takes care of it, at your place

Describe your car and what you need: slot and price confirmed within 24 hours, before the job.

Questions

In short

Can alcantara be washed with soapy water?

Best avoided: too much moisture and the wrong soap can mark the fibre. A dedicated, barely damp product is safer.

Does the steering wheel need to come off?

No, it is cleaned in place, in the car.

Can a very shiny wheel feel soft again?

Often yes, if it is dirty rather than worn. Holed or scuffed fibre, however, does not come back.

Book Call